In the electricity meter settings, you can enable a toggle to indicate that a battery storage system is present. Once activated, we monitor typical control behavior and adjust our management accordingly. Additionally, you can define a grid feed-in buffer in your electricity meter settings. We will then attempt to maintain this power level for grid export during wallbox control. The default setting of 100 W covers most scenarios. If you want to reduce battery discharge, increase the grid feed-in buffer to 200 W – 500 W. In the wallbox settings, you should select the "Clever" charging mode, as other modes may lead to increased battery discharge. Furthermore, you should keep the solar power share at 100%, as a lower percentage will cause the system to draw the difference from the battery storage before pulling power from the grid.